Not sure about a purchase?
Contact us at any of our channels and get inmediate help before making decisions.
Gates G-Force RedLine CVT Drive Belt Polaris RZR 900 RZR XP 1000 2014 Ranger RZR XP 900 2011-2013
SKU
Gates 21R4140
$175.93
Available
Not in stock at our Sanford, FL location but electronically verified in stock at the Manufacturer/Distributor within the last 12 hours. (aka: not experiencing a supply delay)
Description
Applications
Polaris
- RZR 4 900 EPS LE: 2014
- RZR 900: 2014
- RZR 900 EPS LE: 2014
- RZR XP 1000 EPS: 2014
- RZR XP 4 1000 EPS: 2014
- Ranger RZR XP 4 900: 2012 - 2013
- Ranger RZR XP 4 900 EPS LE: 2012 - 2013
- Ranger RZR XP 900: 2011 - 2013
- Ranger RZR XP 900 EPS LE: 2013
- Ranger RZR XP 900 EPS Walker Evans LE: 2013
- Ranger RZR XP 900 HO Jagged X Edition: 2013
- Ranger RZR XP 900 LE: 2011 - 2013
Why G-Force RedLine™ CVT Belts?
- Greater heat resistance and recovery, even under severe duty cycles.
- Optimized, patented EE compound maximizes axial stiffness enabling belts to run at higher continuous torques or loads.
- Innovative design results in better acceleration, higher top speeds, less speed ratio and energy loss in extreme off-road environments.
- Improved durability, crack and wear-resistance means a longer-lasting, high-performance power transmission belt for the most demanding applications.
- Reduced environmental risk — made without harmful chlorinated compounds.
FIND YOUR REDLINE
Designed for the most demanding, turbo-charged off-road CVT applications. With Gates proprietary materials and design, G-Force RedLine™ CVT belts handle extreme temperatures with excellent heat recovery, while maximizing load and torque capacity ? making it one of the most efficient CVT belts currently on the market.
FEATURES AND BENEFITS
- First on the market to utilize Ethylene Elastomer compound to address the needs of larger SxS and high-horsepower ORVs in tough riding conditions.
- Next-generation EE compound offers maximum transverse stiffness and heat resistance, resulting in higher load capacity, higher peak torque capacity, less "heat fade" and less speed loss.
- Delivers 75% greater dynamic axial stiffness on average, up to 50% lower speed losses and better recovery from temperatures up to +170°C (+338°F) without power loss.
- Unmatched Temperature Capability - Runs cooler, resists glazing for better recovery and reduced cracking/chunking out after running at temps exceeding +149°C (+300°F).
- Extended Belt Life - Belt life increased 100-300% versus aftermarket competitive belts in severe duty lab test conditions and in field testing.
- Higher Power Capacity - Reduced speed (rpm) loss by 50% under high loads and increased load capacity by >10% compared to other aftermarket belt.
DON'T BREAK YOUR BELT. BREAK IT IN.
If you don’t break the belt in properly, you’ll find yourself shredding the belt instead of the terrain. In fact, most powersports belt failures can be attributed to improper break-in and clutch adjustment – or not breaking in the belt at all. Follow these three steps to ensure the best performance and longest life from your G-Force™ belt.
1. Install the Right Belt. Using a belt that’s even slightly different than OE specifications can affect performance - or stop you in your tracks.
2. Align and Clean. Align the clutches according to manufacturer specifications and clean the sheaves with a Scotch-Brite™ pad. Remove old belt residue, glazing, oils, and debris with alcohol or acetone on the clutch sheave area. DO NOT USE BRAKE CLEANER.
3. Install and Break It In. Perform two heat cycles (10-15 minutes each) at +27°C (+80°F) at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. If belt installation is at a temperature of +16°C (+60°F) or below, perform two heat cycles in 20 minutes at 30-40 mph (2-wheel drive) with cover installed. Bring the belt temperature down to normal operating temperatures, then shut down and let cool for 30 minutes. Repeat the process a second time. Conservatively run through the entire shift range, without exceeding ¾ throttle. Bring the belt back to normal operating temperature (15 minutes) then shut down and completely cool the belt for 30 minutes. Repeat the process.
| Part # | 21R4140 |
|---|---|
| Product # | 98241020 |
| Description | 21R4140 G FORCE BELT |
| UPC | 770075760368 |
| Double Notch | true |
| Cord Position (in) | .168 |
| Cord Position (mm) | 4.3 |
| Effective Length (mm) | 1083 |
| Notched | true |
| Outside Circumference (in) | 42.625 |
| Outside Circumference (mm) | 1052 |
| Pitch Length (in) | 41.4 |
| Pitch Length (in) | 41.4 |
| Pitch Length (mm) | 1052 |
| Pitch Length (mm) | 1052 |
| Pitch Width (in) | 1.134 |
| Pitch Width (in) | 1.134 |
| Pitch Width (mm) | 28.8 |
| Pitch Width (mm) | 28.8 |
| Section | RVS-R |
| Top Width (in) | 1.219 |
| Top Width (mm) | 31 |
| Angle. | 28.8 |
| Thickness (in) | .627 |
| Thickness (mm) | 15.9 |
Specifications
| Vendor Name Part Number | 21R4140 |
| Availability | In Stock / Available |
| Barcode | 770075760351 |
| UPC Code | 770075760351 |
| Shipping Weight (Dimensional) | 0.900000 |
| Clearance Sale | No |
| Availability | Available |
| Part Type | Drive Belts |
| Make | Polaris |
| Model | RZR XP 1000 2014+ |
| Engine | ProStar 1000 |
| Brand | Gates |
| Carb Legal | No |
| Shipping Label | Free Shipping |
Reviews
Write Your Own Review
Related Items List (3)
Real Street T-Shirt Black w/ Green & White Logo
SKU#RS-TSHIRT
$23.99
Select Options
Eat Sleep Race ABC Book for Future Race Car Drivers
SKU#ESR 1233
48+ In Stock
Dragy 2.0 GPS Based Performance Meter Box USB-C Bluetooth 5.0 with built-in Battery New Version DRG70-C
SKU#DRG70-C
12+ In Stock
Related Items
- SPECS
Specs Color Black Size XS, S, M, L, XL, XXL, XXXL, XXXXL Gender Unisex - $12.9548+ In Stock
- $159.0012+ In StockSPECS
Specs GPS 25Hz Connection type Bluetooth 5.0 Internal Storage No Battery Life Up to 20+ Hours Charging Port USB-C