Not sure about a purchase?
Contact us at any of our channels and get inmediate help before making decisions.
The head gasket is sandwiched between the Cylinder Head and the Block to seal combustion within the combusion chamber. This gasket is not to be reused after a rebuild, and should be replaced any time the head is removed. Most performance head gaskets on the market today are composed of mulitple layers of steel (MLS) material. You can either select a gasket that matches your bore size, or it is also common practice to go with a gasket that has a bore diameter 0.5mm larger than your piston. A gasket that with a thickness that is larger than stock will lower the compression ratio advertised for your pistons, and a gasket with a thickness thinner than stock will raise the compression ratio advertised for your pistons.
To learn more about how attributes influence piston selection, click here to read the Gasket section of Jay's Bottom End Buyers Guide...
Head Gasket Bore Diameter | 86mm (STD) |
Head Gasket Thickness | 0.018in / 0.46mm |
Head Gasket Material | MLS |
Head Gasket Bore Diameter | 86mm (STD) |
Head Gasket Thickness | 0.027in / 0.69mm |
Head Gasket Material | MLS |
Head Gasket Bore Diameter | 90mm (+0.160in Over) |
Head Gasket Thickness | 0.030in / 0.76mm |
Head Gasket Material | MLS |
Head Gasket Bore Diameter | 86mm (STD) |
Head Gasket Thickness | 0.036in / 0.91mm |
Head Gasket Material | MLS |
Head Gasket Bore Diameter | 90mm (+0.160in Over) |
Head Gasket Thickness | 0.077in / 1.95mm |
Head Gasket Material | MLS |
Head Gasket Bore Diameter | 86mm (STD) |
Head Gasket Thickness | 0.040in / 1.0mm |
Head Gasket Material | MLS |
Head Gasket Bore Diameter | 88mm (+0.080in Over) |
Head Gasket Thickness | 0.027in / 0.69mm |
Head Gasket Material | MLS |
Head Gasket Bore Diameter | 88mm (+0.080in Over) |
Head Gasket Thickness | 0.045in / 1.14mm |
Head Gasket Material | MLS |
Head Gasket Bore Diameter | 92mm (+0.240in Over) |
Head Gasket Thickness | 0.032in / 0.81mm |
Head Gasket Material | Copper |
Head Gasket Bore Diameter | 89mm (+0.120in Over) |
Head Gasket Thickness | 0.040in / 1.0mm |
Head Gasket Material | MLS |
Head Gasket Bore Diameter | 86.5mm (+0.020in Over) |
Head Gasket Thickness | 0.018in / 0.46mm |
Head Gasket Material | MLS |
Head Gasket Bore Diameter | 87mm (+0.040in Over) |
Head Gasket Thickness | 0.030in / 0.76mm |
Head Gasket Material | MLS |
Contact us at any of our channels and get inmediate help before making decisions.